Intended.purpose; General.description; Enclosed Parts; Overview - FLORABEST FHE 550 B2 Betriebsanleitung

Intended purpose
The high pruning saw is intended for prun-
ing work on tree branches.
It is not designed for extensive sawing
work, tree felling and cutting materials such
as masonry, plastic or food.
The device is designed for use by adults.
Young people over 16 years old may use the
high pruning saw under supervision only.
It is essential to ensure that you are stand-
ing in a safe position, in order to prevent
accidents. The equipment is not intended for
use by people of restricted physical, sensory
or mental ability. This is also fundamentally
applicable for children.
The manufacturer is not liable for damages,
which were caused through use in appli-
cations for which it was not designed, or
incorrect operation.
The high pruning saw is designed for em-
ployment in the do-it-yourselfer sector. It was
not designed for continuous employment in
the commercial sector.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.

Enclosed parts

Carefully unpack the appliance and check
that it is complete:
- High pruning saw
- Chain bar
- Saw chain
- Blade cover
- Shoulder strap
- Round handle
- 60 ml Grizzly-Bio-Oil
- Allen Key

Overview

1 Saw chain
2. Chain bar
3. Bumber
4. Blade fixing screw
5. Chain adjustment ring
6. Sprocket chain wheel covering
7. Brake arm
8. Pivotal centre (not visible)
9. Adjustable handle
10. On/off switch
11. Safety lock (not visible)
12. Shoulder strap
13. Eye (for shoulder strap)
14. Round handle
15. Quick release (for telescopic han-
dle)
Technical Data
High pruning saw
Rated input voltage .............230V~, 50 Hz
Input power . ................................. 550 W
Safety class ........................................ II
Chain speed ............................. 10,8 m/s
Weight (without guide rail
and chain) .....................................4,1 kg
Weight (with guide rail and chain) ...4,6 kg
Oiltank .........................................70 cm
Chain .......................... Oregon 91 P040X
Chain pitch...............................3/8" (9,5 mm)
Chain bar ........ 10" Oregon Double Guard
Number of chain drive links. . ...................... 40
Chain width ................................. 1,3 mm
Teeth of the sprocket chain wheel . ............ 6
Sawing length (max.) ................... 260 mm
Acoustic pressure level
(L ) . ..................88 dB(A);K
pA
Sound power level (L
guaranteed ........................ 104,0 dB(A)
measured . .. 102,2 dB(A); K
Vibration (an) .......... 3,0 m/s
GB IE
.....................FHE 550 B2
100SDEA041 (518693)
=3,0 dB(A)
pA
)
WA
=1,5 dB(A)
wA
; K=1,5 m/s
2
CY
3
2
5