Renaming System Components; Setting Up New Location; Selecting Location; Setting Fuel - testo 350 S Kurzanleitung

34 5. Setting up Control Unit and analyser box measurement system
Location

5.6 Renaming system components

- Measurement menu is activated.
1 Open system configuration with
2 Select required components.
3 Open setting mode with
4 Change name of the component in the input dialogue box.

5.7 Setting up new location

· Measurement menu is activated.
1 Open system configuration with
- System configuration is shown.
2 Open location selection with
3 Activate setting mode with
4 Select new location.
5 Enter location name and confirm with
6 Select location and confirm with

5.8 Selecting location

· Measurement menu of required instrument is activated.
1 Open system configuration with
- System configuration is shown.
2 Open location selection with
- You will receive an overview of the stored locations and folders.
3 Select location and confirm with
- The new location appears in the system bar.

5.9 Setting fuel

· Measurement menu is activated.
1
Open main menu.
Input
2 Select –>
3 Select fuel with or
4 Value takes effect when
- Automatically return to reading display.
.
Edit
.
.
.
Edit
.
End
.
.
.
.
.
Fuel
.
.
is activated.