Changing The Display; Setting Up The Printer - testo 350 S Kurzanleitung

5. Setting up Control Unit and analyser box measurement system 35

5.10 Changing the display

· Measurement menu is activated.
1 Open main menu.
Device View
2 Select –> .
- Display is shown. The parameter and the unit is shown in every field.
3 Use to select field.
4 Open menu with .
Parameter
5 Select
6 Select parameter and confirm with .
7 Select unit and confirm with .
- The changed parameter with unit appears in the selected field.
5.11 Setting up printer
LF D D r
1 Assign function button with line feed .
.
2 Tilt the printer cover upward
.
3 Place paper in the back slot and push it in
LF D D r
4 The paper is drawn by pressing the function button . The paper can be
pushed in gently by hand if necessary.
5 Place paper roll in lid.
6 Close instrument lid.
7 Pull paper through the front slot.