Automatic Programmes - AEG BP8615101 Benutzerinformation

14 www.aeg.com
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
7.2 Setting the clock functions
• Before you use the
• You can use the
• The functions: Duration
1. Set a heating function.
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
time.
4. Press
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the
signal.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
functions: Duration and
End Time at the same
time if you want to
automatically activate
and deactivate the
appliance on a given time
later.
and End Time do not
work when you use the
core temperature sensor.
again and again until the
or to set the necessary
to confirm.
7.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press
to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.
7.4 Extra Time
The function: Extra Time makes the
heating function continue after the end
of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press a
sensor field.
The display shows the message.
2. Press to activate or
cancel.
3. Set the length of the function.
4. Press .
8.1 Automatic programmes
The automatic programmes give
optimum settings for each type of meat
or other recipes.
to