Beurer BM 70 Gebrauchsanweisung Seite 24

10. Adapter
Model No. FW 7333SM/12
Input 100 – 240 V, 50 – 60 Hz
Output 12 V DC, 700 mA, only in connection with
beurer blood pressure monitor
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and pro-
tected against short circuit and overload
by a primary thermal fuse. The green LED
lights under normal conditions. Make
sure to take the batteries out of the com-
partment before using the adapter.
Double insulated / equipment class 2
Enclosures and Equipment enclosed to protect against
Protective Covers contact with live parts, and with parts
which can become live (finger, pin, hook
test). The operator shall not contact the
patient and the output plug of AC adaptor
simulta neously.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to elec-
tromagnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this unit. More details can be requested from the stated Cus-
tomer Service address or found at the end of the instructions
for use.
• This device is in line with the EU Medical Devices Directive
93/42/EC, the "Medizinproduktegesetz" (German Medi-
cal Devices Act) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3: Sup-
plementary requirements for electro-mechanical blood pres-
sure measuring systems) and IEC 80601-2-30 (medical elec-
trical equipment – Part 2 – 30: Particular requirements for the
safety and essential performance of automated non-invasive
blood pressure monitors).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
24