Connecting To A Computer - Epson EMP-735 Installationshandbuch

Connecting in Access Point Mode or Wired LAN Connection Mode
Tip :
• Select "System Preferences" then "Network" from the Apple Menu to make network
settings. Under "Network", check the box next to the port you wish to use. Uncheck the
other ports. If multiple ports are selected the projector may connect to an incorrect
network.
• For optional performance, set the screen resolution of the computer you are using to
XGA or lower with a color depth of Thousands.
Click on the communication status icon in the top right corner of the screen and
ensure that the following is displayed.
When using the Wired LAN Connection mode, be sure to click on the
communication status icon in the top right corner of the screen and ensure that the
follwing is displayed.
If "AirPort: Off" is not displayed, there is a possibility that you can connect to an
incorrect network
Tip :
To change modes, click on the icon and select "Turn Airport On" or "Turn Airport Off"

Connecting to a Computer

When finished applying the settings, run EMP NS Connection on the computer, and
establish a connection with the projector. Once these settings have been established,
future sessions can begin by just connecting the devices.
Tip :
For Windows
• Install the LAN card in the computer before starting EMP NS Connection. The LAN
card will not be recognised by the EMP NS Connection if the LAN card is installed
after EMP NS Connection is started.
• If you click on the "
with an explanation of the functions of that screen.
56
" icon of any EMP NS Connection screen, help will be displayed
AirPort:On
You can connect to
the Wireless LAN
AirPort:Off
You cannot connect
to the Wireless LAN