Epson EMP-735 Installationshandbuch Seite 28

Channel
Select the channel. The initial value is " 11."
From 1-14 channel numbers can be selected.
Be sure to enter the same channel number(s) on the
connected computer. (Windows only)
* Some channel numbers may be unavailable in some
Password for
When using EasyWeb, you will be asked to enter a
WEB control
password when EMP Monitor is starting up. If a password
has not been setup, access can be mede by simply
pressing the computer [Enter] key when the password
entry screen is displayed.
Up to 8 single-byte alphanumeric characters are available.
Projector
If the projector keyword option is set to "ON", keyword
keyword
entry will be required to connect to the projector over a
wireless LAN. A keyword will be displayed on the screen
of the projector you are trying to connect to. Use this
function to prevent unintended or unauthorized access to
the projector during presentations, from other points on
the wireless LAN.
This option should normally be "ON".
MAC
Displays the wireless LAN card MAC address.
address
* The item contents will be cleared if you select the "Clear" button on the
selected item and press [Enter] on the remote control.
countries. Channel numbers that are unavailable in the
country of purchase have been pre-configured so they
do not display.
*
27