Epson EMP-735 Installationshandbuch Seite 34

3
Select the check box for the name of the projector that you want to
connect, and then click the "Connect" button.
The projector name is shown in the projector's Connection Stand-by screen.
Tip :
• In the event that a projector already connected to another computer is selected, the
previous connection is automatically terminated and the images of the newly connected
computer are projected.
• When multiple projectors are selected, one computer's display can be projected
simultaneously by up to a maximum of four projectors.
• Once the connection has been made, additional connections cannot be added.
Tip :
For Macintosh
When you want to change the network you are using, please click the "Extension"
displayed on the screen. On the "Extension" screen which is displayed, click the "Set up
network" to display the computer's network settings screen. For instructions on how to
make settings, refer to the User's Guide of the computer you are using.
4
If the "Projector keyword" is set to "ON", enter the projector keyword
displayed on the Connection Stand-by screen on the projector, and click
"OK".
The icon status meaning
differs according to colour
as follows.
Grey : Not connected
Orange : Connected to
another computer
33