Connection Restrictions - Epson EMP-735 Installationshandbuch

Connection Restrictions

When projecting images from a computer using the Network Screen, the following
requirements must be met. Please ensure that you meet these requirements.
Supported Resolution
Computer screen resolutions that can be projected are shown below. If the
resolution is on this list, the computer images may be directly projected. You cannot
connect to a computer with a resolution higher than UXGA.
• VGA (640×480)
• SVGA (800×600)
• XGA (1024×768)
• SXGA(1280×960)
• SXGA (1280×1024)
• SXGA + (1400×1050)
• UXGA (1600×1200)
If the computer resolution is higher than XGA, the following message is displayed.
For Windows
Image transfer slows if PC resolution is higher than XGA (1024 ×768 pxl.).
Do you want to continue?
For Macintosh
Image transfer performance will be affected if PC resolution is higher than XGA
(1024 ×768 pxl.) or images use more than 32 bits. Do you want to continue
connection?
If you click "Yes" or "OK", the connection is made, but display speed will be
slower.
If the following massage is displayed, connect after setting the resolution of the
computer to SXGA or less
Some projectors do not support SXGA. Reduce resolution and retry.
If a computer with a special screen size is used where the ratio of height - width is
not represented on the previous list, such as 1280 × 600, a screen resolution to
project images that matches the width dimension is selected from the seven choices.
In this case, the empty margins are black.
35