Epson EMP-735 Installationshandbuch Seite 55

Connecting in Access Point Mode or Wired LAN Connection Mode
9
Press the [Page up] button on the remote control to move the cursor to
"OK", and press the [Enter] button.
This returns to the Connection Stand-by screen and displays the set IP address.
If "Projector keyword" is "ON", the projector keyword is also displayed.
Tip :
The projector keyword changes each time the projector power is turned OFF and ON
again, and when the LAN card is removed and reinstalled. When connecting to a
computer, make sure the projector keyword displayed in the Connection Stand-by screen
is entered. Connection is not possible using a previous keyword.
54
The value is displayed here.