Inserting And Removing Cards; Installation - Epson EMP-735 Installationshandbuch

Inserting and Removing Cards

Inserting and removing PC cards will be explained using the included wireless LAN
card provided as an example. When using a other PC cards or inserting or removing
a card in a PC card slot on a computer, refer to the documentation included with the
card.
Tip :
The following PC cards can be inserted in the card slot on this projector.
• Wireless LAN card (only available with the one included with this projector)
• Memory card
For detailed specifications regarding compatible cards, refer to "Compatible PC
Cards".
• Wired LAN card
For details on compatible wired LAN cards, refer to "Compatible Wired LAN Cards".
p.80

Installation

Caution :
• Insert the PC card facing the right way. Installing the device back to front or upside
down may cause failure or damage.
• Always remove the card before transporting the projector.
Hold the wireless LAN card with the face outwards and insert it into the
projector card slot.
Insert firmly into the slot until it is secure. Once the wireless LAN card has
been fully inserted in the card slot, the rear edge of the card will protrude from
the slot.
14
p.80
This side up