Epson EMP-735 Installationshandbuch Seite 29

Connecting Using Easy Connect Mode
Entering Letters and Numbers
Perform the following steps to enter letters and numbers.
1. Move the cursor to the item to input, and press the [Enter] button on the remote
control. The cursor turns green to indicate you are in input mode.
2. Select numbers or letters by pressing the [ ] button or the [ ] button. For the
projector name, ESSID, and WEB control password, characters are presented in
this order by pressing the [ ] button : A-Z → 0-9 → symbols → a-z → space.
Press the [ ] button to reverse the display order.
3. To input two or more numbers or letters, press the [ ] button on the remote
control. The first number or letter is selected and the cursor moves to the second
entry position. Select the second, and all the subsequent numbers and letters in
the same way as the first character.
4. After you have entered all the characters, press the [Enter] button on the remote
control to finalise the entry. The cursor will turn yellow.
8 When finished making setting changes, press the [Page up] button on
the remote control, and move the cursor to "OK". Press the [Enter]
button.
This applies the setting changes and returns to the Network advanced settings
screen.
28