Connecting To A Group - Epson EMP-735 Installationshandbuch

8
Click the "Close" button.
The Advanced screen is closed and the extension screen is displayed.
Tip :
To delete a group, select the projector from the "Connection group" list of the Advanced
screen, then click on the "Delete" button.

Connecting to a Group

Perform the following steps to connect with a projector registered to a group.
If you have created a group as described in "Creating Groups" and wish to connect
to it, please start with Step 3.
1 Perform Steps 1-3 of "Connecting in IP Connect Mode"
2
The Extension screen is displayed. Select "Use IP connect mode" and
"Use Group List" by clicking on the check boxes, then click on the
"Advanced" button.
p.60
69