Computer Connection Settings - Epson EMP-735 Installationshandbuch

Connecting Using Easy Connect Mode

Computer Connection Settings

For Windows
Computer connection setup is performed using the utility software provided with
the wireless LAN card. If using Windows XP, no utility is necessary to
communicate in ESSID ad hoc mode. Utility software is necessary to communicate
using channel ad hoc mode. If these settings are already established, this step need
not be performed.
Refer to the documentation for the wireless LAN card for instructions on how to use
the utility software.
If the projector has been set to "ESSID
hoc mode on the computer.
If the projector has been set to "Channel
hoc mode on the computer. Set to the same ESSID or channel shown on the
Connection Stand-by screen on the projector.
For Macintosh
The communication port settings will be explained here.
For advanced port settings (network settings) refer to your computer or AirPort
manual.
1 Select "System Preferences" then "Network" from the Apple Menu.
The Network Settings screen is displayed.
2
In "Port Configurations", check the port you wish to use then click "Apply
Now".
Tip :
• When making "Location" settings, you can select the desired location and change all
the network settings one at a time.
30
Check the port you wish to use.
ad hoc", you must also select ESSID ad
ad hoc", you must also select channel ad