Connecting To A Computer - Epson EMP-735 Installationshandbuch

3
Close the window.
Tip :
• Select "System Preferences" then "Network" from the Apple Menu to make network
settings. Under "Network", check the box next to the port you wish to use. Uncheck the
other ports. If multiple ports are selected the projector may connect to an incorrect
network.
• For optional performance, set the screen resolution of the computer you are using to
XGA or lower with a color depth of Thousands.
Click on the communication status icon in the top right corner of the screen and
ensure that the following is displayed.
When the projector has been set to "ESSID ad hoc", click on the communication
status icon in the top right corner of the computer screen. Select the projector's
ESSID name from the pull-down menu which is displayed.
Set to the same ESSID (network name) shown on the Connection Stand-by screen
on the projector.
Tip :
"Channel ad hoc" can only be used with Windows.

Connecting to a Computer

When finished applying the settings, run EMP NS Connection on the computer, and
establish a connection with the projector. Once these settings have been established,
future sessions can begin by just connecting the devices.
Tip :
For Windows
• Install the wireless LAN card in the computer before starting EMP NS Connection. The
wireless LAN card will not be recognised by the EMP NS Connection if the wireless
LAN card is installed after EMP NS Connection is started.
• Set the WEP to OFF in either the wireless LAN card or for internal wireless LAN
functionality.
• If you click on the "
with an explanation of the functions of that screen.
" icon of any EMP NS Connection screen, help will be displayed
AirPort:On
You can connect to
the wireless LAN
31