Epson EMP-735 Installationshandbuch Seite 53

Connecting in Access Point Mode or Wired LAN Connection Mode
WEP
Will not be displayed during Wired LAN connection mode.
WEP
encryption
Format
Key ID
52
Sets whether or not WEP encryption will be used, and if used
sets the encryption type.
"OFF": disables WEP encryption
"128bit": enables 128bit WEP encryption
"40bit": enables 40bit WEP encryption
Sets the input system of the WEP encryption key.
"HEX": enables hexademical input
The method of setting up WEP encryption according to text
varies from access point to access point. Please check with
the administrator of the network you wish to use and first try
selecting "Text1". If that does not correctly setup the
encryption, try first using "Text2" and then"Text3".
Values can be entered when "WEP encryption" has been set
to "40bit". Choose the WEP encryption key ID from "0" "1"
"2" "3."
When "WEP encryption" has been set to"128bit" the value is
set to "0".