Connecting A Computer; Compatible Computers; Setup Examples - Epson emp tw10h lcd projector Bedienungsanleitung

Connecting Equipment

Connecting a Computer

See the "Quick Reference Guide" for instructions on connecting to video equipment.
When connecting, be sure to:
c
• Turn off the power for both the projector and the computer.
Damage may result if you try to make a connection when the power is switched on.
• Check the connector types.
Damage may result if you attempt to insert a connector into the incorrect port.

Compatible computers

Condition 1: Check that the computer has an image output port, such as an RGB port, monitor
port or CRT port.
Some computers with an in-built monitor and some laptop computers may not be compatible. Please
refer to your computer manual for further details.
Condition 2: The display frequency and resolution of the computer must correspond to that of the
projector. s "Supported Display Resolutions" P.26
p
You may need to purchase a separate adapter depending on the shape of the computer's port. Refer to the documentation
provided with the computer for further details.
fLaptop connection

Setup examples

p
When using a laptop or a computer with an in-built
monitor, select external video output on the computer.
Windows:
Press and hold the [Fn] key, followed by the appropriate
function number key.
NEC
[Fn]+[F3]
Panasonic
[Fn]+[F5]
Toshiba
IBM
[Fn]+[F7]
SONY
[Fn]+[F10]
Fujitsu
Macintosh:
Set mirror setting or display detection.
10
-Connecting a Computer
Refer to your computer's documentation for further
details.
Depending on your version of Windows, a
dialog box may appear to alert you that new
display hardware has been found. Follow the on-
screen instructions to proceed. If you have any
Win
problems, please contact the nearest address
provided in the "International Warranty
Conditions" section in the "Safety Instructions /
World-Wide Warranty Terms" guide.
• It may take a few moments until the computer
image is projected.
Win
• Depending on the computer, the monitor may
/
Mac go blank when using the external video output
on the computer.