Epson EMP-735 Installationshandbuch Seite 58

1
For Windows
Start Windows on the computer, then select "Start" - "Programs" (or "All
Programs") - "EPSON Projector" - "EMP NS Connection".
EMP NS Connection starts.
Tip :
If EMP NS Connection is started while PowerPoint is also starting, the message
"Slideshow may not start without rebooting PowerPoint", will be displayed during
startup. If this occurs, close PowerPoint and restart it once EMP NS Connection has
finished starting.
For Macintosh
Double click on the "Applications" folder of the hard disk volume on
which EMP NS Connection was installed, then double click on the EMP
NS Connection icon. EMP NS Connection starts. Continue from step 3.
Tip :
If you selected a different directory at the time of installation, open that folder first, then
double-click on the EMP NS Connection icon.
2
The first time EMP NS Connection starts after installation. Select the
LAN card that will be used for the connection, and click "OK".
(Windows only)
Tip :
Once the current network adapter has been selected in this Switch network screen, this
screen will not be displayed at subsequent EMP NS Connection start-ups. To change the
current network adapter, click the "Extension" button in the Projector selection screen
(screen in Step 3). Clicking the "Switch LAN" button on the Extension screen displays
the Switch network screen.
57