Epson EMP-735 Installationshandbuch Seite 48

Establish settings enabling the projector to function on the network.
Settings are divided into four kinds, "Basic", "Mail", "SNMP" and "WEP".
"WEP" is not displayed in the Wired LAN connection mode advanced settings
screen.
Selections are described in the following table.
Letters or numbers must be input depending on the item. See the "Entering
Letters and Numbers" (
Tip :
It is also possible to access the projector setup/control browser page using a Web
browser, and perform network setup on that page (EasyWeb). Using EasyWeb is more
convenient than entering characters on the remote control because a keyboard can be
used. "Changing Settings Using a Web Browser (EasyWeb)" in the EasyMP
Operation Guide
p.53 ) for the letter and number input methods.
47