Inserting And Removing Cards; Installation - Epson EasyMP EMP-735 Aufstellungsanleitung

Inserting and Removing Cards

Inserting and removing PC cards will be explained using the included wireless LAN
card provided as an example. When using a commercial memory card, please refer
to the documentation included with the card. If inserting or removing a card in a PC
card slot on a computer, please refer to the documentation for the computer.
Tip :
The following PC cards can be inserted in the card slot on this projector.
• Wireless LAN card (only available with the one included with this projector)
• Memory card
For detailed specifications regarding compatible cards, refer to "Compatible Memory
Cards".
• Wired LAN card
For details on the available wired LAN card, please visit the Web site
http://www.epson.co.uk/.
For Network settings, refer to "Connecting in Access Point Mode".

Installation

Caution :
Insert the PC card facing the right way. Installing the device back to front or upside
down may cause failure or damage.
Hold the wireless LAN card with the face uppermost and insert it into the
projector card slot.
Insert firmly into the slot until it is secure.
16
p.60
This side up
p.41