Inserting And Removing Lan Cards; Inserting The Lan Card Into The Projector - Epson EMP-765 Installationshandbuch

Inserting and Removing LAN Cards

Inserting the LAN Card into the Projector

This describes how to insert and remove LAN cards, using the wireless LAN card
that is included with the projector as an example. If using a wired LAN card, read
the instructions that are provided with the card being used.
Caution :
• Make sure that the card is facing the correct way. If it is inserted incorrectly, it will
cause operating problems and may damage the card and the projector.
• Be sure to remove the card before transporting the projector.
Procedure
Insert the wireless LAN card into the card slot so that it is facing upwards.
Push the wireless LAN card in firmly as far as it will go.
Top
19