ModelCraft 23 36 14 Bedienungsanleitung Seite 185

The pitch curve for every flight mode (F-Mode, flight condition) has five points, than can
be individually set.
Inside the pitch curve the points are titled: PH (Pitch High), P3, P2, P1 and PL (Pitch Low).
The area of the positioning value and the pre-positioning for every point are listed below.
Now press the „INC+/YES" button to activate P3 and P1 when they appear in the display.
To return to the initial values, press the „INC+/YES" button and the „DEC-/NO"-button at
the same time.
F-Mode curve point
Normal PH
P3
P2
P1
PL
l, 2 PH
P3
P2
P1
PL
3, Hold PH
P3
P2
P1
PL
To program the gas curves, press the „CH+"or „CH-"-button to reach up to the „P-F"-Dis-
play.
Minimum Factory setting
-25% 100%
-25% INH
-25% 50%
-25% INH
-25% 0%
-25% 100%
-25% INH
-25% 50%
-25% INH
-25% 0%
-25% 0%
-25% INH
-25% 0%
-25% INH
-25% 0%
Figure 115
Maximum
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
125%
185