Rudder / Aileron Mixer (R>A, Rudder-Aileron Mixing) - ModelCraft 23 36 14 Bedienungsanleitung

Rudder / Aileron Mixer (R>A, RUDDER-AILERON MIXING)
If this function is used, it effects a deflection of the aileron to the left and right, incase
the rudder joystick deflects to the left or right. The mixer can control flight functions at
the transmitter. . For the knife flight for example, if a slight correction at the aileron is
necessary, to avoid the transfer to a roll.
To set such a mix, first press the „CH+"-button to activate the function „RU".
Press the „FUNCTION- "-button, to show the „R->A 0%"-Display Now a rudder can be
mixed to an aileron. The display setting range is from -100% to +100%.
For the mixing and the rudder deflection to left and right to the aileron the value can be
set. If you move the rudder joystick, you can see arrows showing left and right. For
example the mixer the mixer can be turned 20% to the left, -30% to the right, depending
on how you need the direction frequency.
Please note: BASIC must be switched off.
IMPORTANT!
If the „R>A"„ mixer is activated by inserting a value once, the following time
stays activated and the plane reacts according to all control commands,
because the function cannot be switched off with a switch.
To use a switch hereto, you can use the function of the compensation mixer.
Figure 90
167