E) Submenu "Image Adj; F) Submenu "Daynight - Sygonix 1420408 Bedienungsanleitung

e) Submenu "IMAGE ADJ"

This summarises all functions for setting the image. The setting functions are distributed across
two screen pages; you can switch between the two screen pages as usual with "NEXT" and
"BACK".
The following functions are available:
"SHARPNESS" Image sharpness
"HDNR" Noise suppression
"CONTRAST" Contrast
"SATURATION" Colour saturation
"R GAIN" Set red ratio
"G GAIN" Set green ratio
"B GAIN" Set blue ratio
"PARA I" Do not change (for the manufacturer only)
"PARA V" The value cannot be set (is automatically changed and displayed by adjust-
ing "PARA I")

f) Submenu "DAYNIGHT"

"EXT" Here, you can set a delay time ("D TIME") for activating the IR filter (1 - 100
seconds).
"AUTO GEN" The camera switches between colour and black/white automatically depend-
ing on ambience brightness in the basic setting.
Press the button to show a submenu:
"D CTRL": Delay time (1- 100 seconds) for switching between colour and
black-and-white display.
"DAY2NIGHT": Value of the ambience brightness (1 - 100 Lux) from which
onwards the switch from colour to black/white mode is performed
"NIGHT2DAY": Value of the ambience brightness (1 - 100 Lux) from which
onwards the switch from black/white to colour mode is performed
"COLOR" The video is always shown in colour, no matter the ambience brightness
(if the ambience brightness is low, there will be image noise for functional
reasons).
"BLACKWHIT" The video is always displayed in black/white, no matter the ambience bright-
ness.
32