G) Submenu "System; H) Submenu "Bad Pixel; I) Submenu "Privacy Mask - Sygonix 1420408 Bedienungsanleitung

g) Submenu "SYSTEM"

"LANG" You can select the language for the menu display here. At the time of crea-
tion of these operating instructions, only the languages English and Chinese
were available.
"TV GAMMA" Gamma correction for colour display ("LOW", "MIDDLE" , "HIGH")
"TV BRIGHT" Setting the brightness ("LOW", "MIDDLE" , "HIGH")
"TV SYSTEM" Selection of the TV system ("PAL" or "NTSC")

h) Submenu "BAD PIXEL"

"MODE" There are pixel errors due to the sensor build. They can be computed out
of the picture by switching this function "ON" (the automatic function can be
switched off by setting it to "OFF").
"INTENSITY" Set the intensity at which the defective pixels are computed out of the screen
content here ("LOW", "MIDDLE", "HIGH").

i) Submenu "PRIVACY MASK"

It is possible to cover up to 4 image areas, e.g. to protect sensitive areas, such as displays on a
screen, from monitoring or recording.
"MODE" When selecting "MOSAIC", the covered image areas are pixelated with a
grid. This still shows when things use in the image area, but no details are
visible.
By selecting "DEF COLOR", the covered image areas are fully covered by
one of 15 colours.
"DEF COLOR" Set the colour for covering the image areas; 15 different colours are avail-
able. Observe that the colours are displayed grey in black/white display of the
camera image (e.g. at night)!
"SELECT" Select one of the 4 image areas here. Then you can switch the chosen image
area on and off with the "SWITCH" function. You can place it on the camera
picture in the function "RANGE".
"SWITCH" Switch coverage for the image area chosen in "SELECT" (see above) "ON"
or "OFF" here.
33