E) Submenu "Image Adj; F) Submenu "Daynight - Sygonix 1423058 Bedienungsanleitung

e) Submenu "IMAGE ADJ"

This summarises all functions for setting the image. The setting functions are distributed across two screen
pages; you can switch between the two screen pages as usual with "NEXT" and "BACK".
The following functions are available:
"SHARPNESS"
"HDNR"
"CONTRAST"
"SATURATION"
"R GAIN"
"G GAIN"
"B GAIN"
"PARA I"
"PARA V"

f) Submenu "DAYNIGHT"

"EXT"
"AUTO GEN"
Image sharpness
Noise suppression
Contrast
Colour saturation
Set red ratio
Set green ratio
Set blue ratio
Do not change (for the manufacturer only)
The value cannot be set (is automatically changed and displayed by adjusting
"PARA I")
Here, you can set a delay time ("D TIME") for activating the IR filter (1 - 100 seconds).
The camera switches between colour and black/white automatically depending on
ambience brightness in the basic setting.
Press the button to show a submenu:
"D CTRL": Delay time (1- 100 seconds) for switching between colour and black-and-
white display.
"DAY2NIGHT": Value of the ambience brightness (1 - 100 Lux) from which onwards
the switch from colour to black/white mode is performed
"NIGHT2DAY": Value of the ambience brightness (1 - 100 Lux) from which onwards
the switch from black/white to colour mode is performed
37