Cleaning And Maintenance; Replacing The Fuse - EuroLite LED KLS--170 Bedienungsanleitung

000‒249
23
250‒255
000‒249
24
250‒255
25 000‒249
250‒255
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are only
to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. If defective, please dispose of the unusable device in
accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before replacing
the fuse, unplug mains lead.
Procedure:
• Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
• Step 2: Remove the old fuse from the fuse holder.
• Step 3: Install the new fuse in the fuse holder.
• Step 4: Replace the fuse holder in the housing.
Strobe effect white LED/UV LED 2 slow
White/UV LED 2 on
Strobe effect white LED/UV LED 3 slow
White/UV LED 3 on
Strobe effect white LED/UV LED 4 slow
White/UV LED 4 on

CLEANING AND MAINTENANCE

fast
fast
fast
30 • EN