EuroLite LED KLS--170 Bedienungsanleitung Seite 25

Menu structure
Operating mode
Aut Automatic mode
Spots
Strobe LEDs
Spots and
strobe LEDs
Sou Sound control
Spots
Strobe LEDs
Spots and strobe LEDs
CoL Color mode
Spots and
strobe LEDs
SYN Sync mode
Sync mode
dПH DMX mode
Start address
Channel mode
Start address
SLA Master/slave mode
Slave mode
SYS System settings
System settings
Notes
• Approx. 5 seconds after pressing the last button, the setting procedure in the sub menus is aborted.
• SLAV or d*** modes: If no control signals are available, the display will be flashing.
• While menu AutP, AutF, AutM, SouP, SouF or SouM is selected, all LEDs are switched off; in the sub menus they
will be switched on again.
• The sync mode is a new functionality for Eurolite devices. Similar to the master/slave operation, it is possible to
interconnect several devices and control them collectively. If one device is set to sync mode, all other units will
respond to its control signals (from 10 devices).
Programming levels
AP01—AP17
AutP
S.01—S.99
AF01—AF12
AutF
S.01—S.99
AM01—AM03
AutM
S.01—S.99
SouP SP01—SP12
SouF SF01—SF11
SouM SM01—SM03
R.000—R.255
G.000—G.255
CoLo
B.000—B.255
S.000—S.099
SY-A S.001—S.099
SY-M
d***
03CH
06CH
25CH
d001—d***
S.001—S.255
ON
M-En
OFF
ON
W-En
OFF
ON
IrEn
OFF
tESt
rSEt
Show program 1-17
Running speed slow
Show program 1-11
Running speed slow
Show program 1-3
Running speed slow
Show program 1-12
Show program 1-11
Show program 1-3
Red 0-255
Green 0-255
Blue 0-255
Strobe effect slow
Automatic mode
Running speed slow
Sound control
Start address (read only)
3 channels
6 channels
25 channels
Start address
Slave address
Master mode activated
Master mode deactivated
Antenna for foot switch is activated
Antenna for foot switch is deactivated
IR remote control activated
IR remote control deactivated
Test mode for the LEDs; IR remote control with
ON/OFF and foot switch with BLACKOUT
Resets to factory defaults
25 • EN
Function
fast
fast
fast
fast
fast