Hirschmann Power MICE Anwenderhandbuch Seite 101

Multicast-Routing
#show ip igmp
IGMP Admin Mode................................ Enable
IGMP INTERFACE STATUS
Interface Interface Mode
--------- --------------- ---------------
1/2 Enable
1/3 Enable
2/1 Enable
2/2 Enable
#show ip igmp interface 2/1
Slot/Port...................................... 2/1
IGMP Admin Mode................................ Enable
Interface Mode................................. Enable
IGMP Version................................... 2
Query Interval (secs).......................... 125
Query Max Response Time (1/10 of a second)..... 100
Robustness..................................... 2
Startup Query Interval (secs) ................. 1
Startup Query Count............................ 2
Last Member Query Interval (1/10 of a second).. 10
Last Member Query Count........................ 2
Konfigurieren Sie Router B und Router C analog zu Router A.
Routing L3P
Release 3.1 08/07
8.5 Multicast-Konfiguration
Protocol State
Operational
Operational
Operational
Operational
101