Hirschmann Power MICE Anwenderhandbuch Seite 76

OSPF
Router ID...................................... 10.0.2.2
OSPF Admin Mode................................ Enable
ASBR Mode...................................... Enable
RFC 1583 Compatibility......................... Enable
ABR Status..................................... Disable
Exit Overflow Interval......................... 0
External LSA Count............................. 0
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
External LSDB Limit............................ No Limit
Default Metric................................. Not configured
Default Route Advertise........................ Disabled
Always......................................... FALSE
Metric.........................................
Metric Type.................................... External Type 2
Maximum Paths.................................. 4
Redistributing.................................
Source......................................... Connected
Metric......................................... Not Configured
--More-- or (q)uit
Metric Type.................................... 2
Tag............................................ 0
Subnets........................................ Yes
Distribute List................................ Not configured
show ip ospf interface brief Prüfung der Einstellungen für die OSPF-Inter-
Interface AdminMode Area ID
Intval
--------- --------- ----------- -------- ------ ------ ------ -----
2/1 Enable
2/2 Disable
configure
ip routing
exit
Nehmen Sie die entsprechende Konfiguration auch auf den anderen
OSPF-Routern vor.
show ip ospf neighbor brief
Router ID
----------------
10.0.2.1
76
face-Konfiguration.
Router Hello
Priority Intval Intval Intval Delay
0.0.0.0 1
0.0.0.0 1
Wechsel in den Konfigurationsmodus.
Router-Funktion global einschalten.
Wechsel in den Priviledged-EXEC-Modus.
Prüfung der OSPF-Nachbarschaftsverhältnisse.
IP Address Neighbor Interface
----------- -------------------
10.0.2.1
6.6 OSPF konfigurieren
Dead Retrax Retrax LSAAck
10 40 5
10 40 5
2/1
1 1
1 1
State
---------
Full
Routing L3P
Release 3.1 08/07