Transport And Storage; Safety Measures - Unitest 93517 Bedienungsanleitung

The scope of delivery comprises
1. UNITEST Sound level meter
2. 1 battery 9V, IEC 6LR61
3. Adjustment screwdriver
4. 3.5 mm phone jack
5. Carrying case
6. Windbreak
7. Instruction manual
2.0

Transport and Storage

Please keep the original packaging for later transport, e.g. for calibration. Any trans-
port damage due to faulty packaging will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to remove accumulators when
not using the instrument over a certain time period. However, should the instrument
be contaminated by leaking battery cells, you are kindly requested to return it to the
factory for cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an instrument
being transported in extreme temperatures, a recovery time of minimum 2 hours is
required prior to instrument operation.
3.0

Safety Measures

The respective accident prevention regulations established by the
professional associations are to be strictly enforced at all times
Measurements in dangerous proximity of electrical installations are only to
be executed when instructed by a responsible electrical specialist, and never
alone.
Never try to disassemble battery cells !The battery contains highly alkaline
electrolyte. Danger of causticization ! If electrolyte gets in contact with skin
or clothing, rinse immediately with water. If electrolyte gets in contact with
the eyes, immediately flush by using pure water and consult a doctor.
Never try to short-circuit both battery cell poles by using, e.g. a wire. The
resulting short-circuit current is very high and causes extreme heat. Danger
of fire or explosion.
Never throw battery cells into a fire as this could cause an explosion.
When replacing or changing the battery, make certain of correct polarity.
3