Introduction / Scope Of Supply; Transport And Storage - Unitest BEHA CHB 5 Bedienungsanleitung

1.0

Introduction / Scope of Supply

The UNITEST CHB 5 is a universal, multi-purpose electrical measuring instrument. It com-
ply with the standards DIN VDE 0411 and EN 61010, and provide safe, reliable operati-
on. The clamp meter is a valuable tool for all sorts of measurements in both trade and in-
dustry.
• 4 digit liquid-crystal display
• manual range selection for current, voltage measurements
• Contactless frequency measurement
• Clamp opening 30 mm
• MIN/MAX values
Scope of supply:
1 pce. UNITEST Clamp Meter CHB 5
2 pce. test leads with probes (red/black)
2 pce. battery 1,5V IEC LR6
1 pce. holster
1 pce. Instruction Manual
Further accessories, such as test leads, probes, connectors, etc., are listed in the UNI-
TEST catalogue.
2.0

Transport and Storage

Please keep the original packaging for later transport, e.g. for calibration. Any transport
damage due to faulty packaging will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to remove accumulators when not using
the instrument over a certain time period. However, should the instrument be contami-
nated by leaking battery cells, you are kindly requested to return it to the factory for
cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an instrument being
transported in extreme temperatures, a recovery time of minimum 2 hours is required
prior to instrument operation.
3