Servo Mode Partial Light Output Settings; Learn Function (Learn) - Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung

10.4.3 Servo mode partial light output
SYNC
M-Servo
• Press the sensor button
output on the touch display as many times
M-
as it takes for the partial light output
m
Zoom 35
m
display to appear.
• Press sensor buttons
P
touch display and set the desired partial
1/1
light output to 1/1, 1/2, 1/8 to 1/256 .
O
P
• Press the sensor button on the touch
1/8 - 2/3
display for the selected partial light output
1/16
1/16
1/16 - 1/3
The partial light output is adopted.
p
q
SYNC
M-Servo
M-
k
Once the slave flash units have achieved
Zoom 35 m
flash-readiness, the AF measurement flash
m
flashes.
P
1/16
+
Slave groups and remote channels cannot be
set in SERVO mode.
The camera flash unit may not work in the
remote mode.
172
settings
P
for partial light
on the
(e.g. 1/16).

10.4.4 Learn function (LEARN)

The "Learn function" enables individual auto-
matic adjustment of the slave flash unit to
the flash technology of the camera's flash
unit.
In the process, one or more pre-flashes, e.g.
to reduce the "red-eye effect" of the camera
flash unit can be taken into account.
The slave flash unit is then fired to coincide
with the main flash that illuminates the actu-
al picture.
+
If the camera's own flash device provides for
automatic focussing AF measuring flashes,
then due to the system characteristics no
learn operation is possible.
+
If possible, use another camera mode or
change to manual focussing.