Range Display In M Or Ft; Flash Bracketing Series (Flash Brack.) - Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung

11.7 Range display in m or ft

The range indication in the display can either
be shown in metres (m) or feet (ft).
Setting procedure
D
• Press the button as often as it takes
for the selection menu to appear.
OPTION
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
m/ft
touch display and select
m/ft
• Press the sensor button on the
touch display.
m ft
• Press the or sensor button on the
touch display.
The setting is adopted immediately.
11.8 Flash Bracketing Series
(FLASH BRACK.)
A series of flash exposures (flash-bracketing
FB) can be carried out in the TTL and automa-
tic flash modes. A flash bracketing series
consists of three successive flash shots with
different flash exposure correction values.
When a flash bracketing series is set, FB and
the correction value appear on the display.
The possible correction values range from
1/3 to 3 apertures in onethird aperture
increments.
OPTION
OPTION
AF BEAM
FLASH BRACK.
.
q
FLASH BRACK. O
2/3
1
1 1/3
q
Setting procedure
D
• Press the button as often as it takes
for the selection menu to appear.
OPTION
• Press the sensor button on the
touch display.
O
• Press the sensor buttons on the
touch display and select
FLASH BRACK.
• Press the
the touch display.
• Press the sensor buttons on the
p
touch display and select a correction value.
• Press the sensor button on the touch
display for the selected correction value,
1
e.g. .
The setting is adopted immediately.
• The first shot is taken without a correction
value. „FB I" will also appear on the
display.
p
• The second shot is taken with minus correc-
tion. „FB II" and the minus correction value
(EV) will also appear on the display.
• The third shot is taken with plus correction.
„FB III" and the plus correction value (EV)
will also appear on the display.
• After the third shot, the flash bracketing
series is automatically deleted. „FB" will
disappear from the display
When the flash bracketing series is set, the
correction value is always shown as a positi-
ve value!!
FLASH BRACK.
.
sensor button on
k
179