Herunterladen Inhalt Inhalt Diese Seite drucken

Cordless Flash Mode - Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Wide-angle diffuser
With the wide angle diffuser
of 12 mm or more can be illuminated (35 mm
format).
Pull the wide-angle diffuser
reflector as far as it will go, and then release
it.
The wide-angle diffuser
folds downwards. The reflector automatically
moves to the required position.
The distance readings and the zoom value
are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom
reflector
is not activated if the wide-angle
diffuser is in use.
To insert the wide-angle diffuser
upwards 90° and push it all the way in.
mecabounce Diffuser MBM-03
If the mecabounce (optional accessories, see
19) is fitted to the reflector of the flash unit,
the reflector is automatically guided to the
position required. The distance data and
zoom factor are corrected to 16 mm.
+
The automatic adjustment of the motor-zoom
reflector is not activated if the mecabounce
is in use.
The simultaneous use of the wide-angle dif-
fuser and the mecabounce is not possible.
, focal lengths
out from the
automatically
, turn it

10 Cordless flash mode

The flash unit is compatible as a slave flash
unit with the wireless Olympus RC flash
system (RC=remote control or remote mode).
The remote system consists of a master flash
unit on the camera and one or more slave
flash units. The slave flash unit(s) are con-
trolled via wireless technology by the reflec-
tor of the master flash unit.
The slave flash unit is assigned to one of
three possible groups (A, B or C). Each group
can in turn consists of one or more slave
flash units.
The entire remote system can be operated
TTL
M
either with
-or
mode.
A change to the type of flash mode must be
made on the master.
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
The slave flash units must be able to receive
the light from the master flash unit with the
integrated Sensor for cordless remote control
.
Remote flash mode also supports second
curtain synchronisation. In remote flash
mode, the maximum flash range is not indi-
cated on the flash unit's display panel.
k
167

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis