Strobe Flash Mode - Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung

7.6 Strobe flash mode

The strobe flash mode is a manual flash
mode. It allows several flash exposures to be
made on a single photo, which can be espe-
cially interesting for movement studies or
special effect images. In strobe flash mode,
several flashes at a certain flash frequency
are emitted. For this reason, this function is
only possible with a partial light output of
1/8 or less.
For a strobe exposure, the frequency of the
flashes (flashes per second) as well as the
number of flashes must be selected.
Strobe number of flashes (N)
In strobe mode, the number of flashes per
shot (N) can be selected.
The number of flashes can be set from 2 to
90, depending on the set partial light output.
+
The maximum possible number of flashes
k
(N) depends on the set partial light output
(P).
Strobe flash frequency (f)
Strobe mode allows you to select the flash
frequency (f), which indicates the number of
flashes per second.
The number of flashes can be set from 1 to
100. The maximum possible number of flas-
hes is automatically adjusted.
If you desire short flashes, you can manually
reduce the partial light output to the lowest
value of 1/256.
162
+
The maximum possible frequency of flashes
(f) depends on the set partial light output
(P).
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last .
TTL
• Press the sensor button of the displayed
mode of operation on the touch display as
0.8 - 9.0 m
many times as it takes for the display for
M-
selecting the mode of operation to appear.
5,6
m
35
Zoom F
m
EV
O
MODE
• Press the
M
touch display and select
STROBO
REMOTE SLAVE
• Press the
p
q
touch display.
STROBO
• Set a suitable mode of operation on the
camera, e.g.
M-
3.1m
m
35
Zoom
m
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
5 5
N f(Hz)
P
1/8
sensor buttons on the
STROBO
.
STROBO
sensor button on the
M
.