Displays In The Camera Viewfinder - Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung

Range display in manual flash mode
M
In manual flash mode , the distance that
must be maintained from the subject for cor-
rect flash exposure is indicated. Adjustment
9.0 m
to the photographic situation at hand can be
M-
5,6 achieved by, for example, changing the aper-
m
35
Zoom F
m
ture setting on the lens or selecting a manual
P
partial light output level (see 7.3).
1/1
Exceeding the display range
Flash ranges of up to 99 m or 99 ft can be
shown in the display.
TTL
This display range can be exceeded in the
case of high ISO values and large aperture
49- 99 m u
openings.
An arrow or triangle after the distance value
M-
1,4
m
200
Zoom F
indicates that the display range has been
m
EV
exceeded.
M 6 Displays in the camera
viewfinder
Examples for the camera viewfinder display:
Flash symbol flashes
Command to switch on or use the flash unit.
Flash symbol is illuminated
The flash unit is ready for firing.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera's operating instructions.
Incorrect exposure guidelines:
• overexposure: do not use the flash!
• underexposure: switch the flash on or use a
tripod and a longer exposure time.
Reasons for incorrect exposure can lay in the
various exposure and automatic program-
mes.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera's operating instructions.
k
157