Metz Mecablitz 64 AF-1 digital -Olympus-Panasonic-Leica Bedienungsanleitung Seite 166

Setting procedure
• Press the
for the selection menu to appear.
• Press the
PARAMETER
touch display.
PARAMETER O
• Press the
P/EV
touch display and select
ZOOM
F
• Press the
p
q
touch display.
O
ZOOM
• Press the
70 touch display and select the desired zoom
value.
85
• Press the sensor button on the touch
105
display for the desired zoom value
k
p
q
The setting will take effect immediately.
The following zoom positions are possible for
the reflector: 24 - 28 - 35 - 50 - 70 - 85 - 105-
135-180-200 mm (35 mm format).
Tip:
If you do not necessarily need the full guide
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens.
This will provide full light coverage of the pic-
ture and eliminate the need to continually
adjust it to the focal length of the lens.
166
D
button as often as it takes
PARAMETER
sensor button on the
sensor buttons on the
ZOOM
.
ZOOM
sensor button on the
sensor buttons on the
Example:
You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.
Resetting to auto-zoom
• Touch the shutter release to begin a data
transfer between the flash unit and the
camera.
• Press the
for the selection menu to appear.
• Press the
PARAMETER
touch display.
• Press the
PARAMETER O
touch display and select
P/EV
ZOOM • Press the
touch display.
F
• Press the
p
q
display and select
O
ZOOM
• Press the
touch display.
After around 10 seconds, the operation
AUTOZOOM
display appears, or press the
24
repeatedly until the operation display
p
q
appears.
D
button as often as it takes
PARAMETER
sensor button on the
sensor buttons on the
ZOOM
.
ZOOM
sensor button on the
sensor buttons on the touch
AUTOZOOM
.
AUTOZOOM
sensor button on the
D
button