Servo Mode Partial Light Output Settings; Learn Function - Metz Mecablitz 64 AF-1 digital -Sony Bedienungsanleitung

10.4.3 Servo mode partial light output
SYNC
M-Servo
• Press the sensor button
M-
output on the touch display as many times
m
Zoom 35
as it takes for the partial light output
m
display to appear.
P
1/1
O
P
• Press sensor buttons
touch display and set the desired partial
1/8 - 2/3
light output to 1/1, 1/2, 1/8 to 1/256 .
1/16
1/16 - 1/3
• Press the sensor button on the touch
p
q
display for the selected partial light output
1/16
SYNC
M-Servo
M-
k The partial light output is adopted.
Zoom 35 m
m
Once the slave flash units have achieved
flash-readiness, the AF measurement flash
P
1/16
flashes.
+
Remote channels cannot be set in SERVO
mode.
The camera flash unit may not work in the
remote mode.
190
settings
P
for partial light
on the
(e.g. 1/16).

10.4.4 Learn function

The "Learn function" enables individual auto-
matic adjustment of the slave flash unit to
the flash technology of the camera's flash
unit.
In the process, one or more pre-flashes, e.g.
to reduce the "red-eye effect" of the camera
flash unit can be taken into account.
The slave flash unit is then fired to coincide
with the main flash that illuminates the actu-
al picture.
+
If the camera's own flash device provides for
automatic focussing AF measuring flashes,
then due to the system characteristics no
learn operation is possible.
+
If possible, use another camera mode or
change to manual focussing.