Motor Zoom Reflector; Reflector Adapter - Metz MECABLITZ 58 AF-1 Sony Bedienungsanleitung

8 Motor Zoom Reflector

The zoom position of the main reflector can be adjusted for focal lengths of at
least 24 mm (35 mm format). For lenses with focal lengths of 18 mm or more,
the integrated wide-angle diffuser
.
The following zoom positions are available:
24 - 28 - 35 - 50 - 70 - 85 - 105 (focal lengths in mm)
(corresponding to 35 mm format)
When using the wide-angle diffuser
cally moved to the 24 mm position! Because of the wide-angle diffuser,
18 mm appears on the display (see 9).
Automatic zoom adjustment
This causes the zoom position of the main mirror
lens focal length. "AZoom" and the mirror position will then appear on the flash
unit's display panel.
Manual adjustment of the zoom position with AZoom
The zoom position of the main reflector
unit is used with a camera capable of data transmission, in order to achieve spe-
cial lighting effects (such as hot-spot, etc.). See also 6.2.
Once saved, „MZoom" will be indicated on the display.
Resetting to AZoom mode
• Touch the shutter release to begin a data transfer between the flash unit and
the camera.
• Continue changing the zoom position until AZoom appears on the display.
can be positioned over the main reflector
the main reflector is automati-
to automatically adjust to the
can also be changed when the flash

9 Reflector adapter

Wide-angle diffuser
With the wide angle diffuser , focal lengths of 18 mm or more can be illumi-
nated (35 mm format).
Pull the wide-angle diffuser out from the main reflector
and then release it. The wide-angle diffuser automatically folds downwards.
The main reflector automatically moves to the required position. The distance
readings and the zoom value are corrected to 18 mm on the display panel.
The main reflector's position cannot be changed by hand.
To insert the wide-angle diffuser
in.
Mecabounce 58-90
If the mecabounce 58-90 (optional accessories, see 21) is used, the main reflec-
tor is automatically guided to the required position. The distance readings
and the zoom value are corrected to 16 (mm) on the display. The main reflector's
position cannot be changed by hand.
as far as it will go,
, turn it upwards 90° and push it all the way
107