Metz MECABLITZ 58 AF-1 Sony Bedienungsanleitung Seite 102

Camera without integrated flash unit
• Press the "SEL" key repeatedly until "Select" appears on the display.
• Use the UP and DOWN
The selected menu item will be highlighted with a dark bar.
• Press the "Set" key to confirm the selection of "Remote".
• Use the UP and DOWN
or "Remote OFF" to deactivate Remote Mode.
The setting will take effect immediately
• Press "Return" repeatedly until SLAVE appears on the display. If the
"Return" key is not pressed, the display will automatically switch back
to SLAVE after approx. 5 seconds.
• The slave flash unit then automatically recognises the "CTRL" or "CTRL "
function.
102
keys to select the menu item "Remote".
keys to select "Remote Slave" for Slave Mode
CTRL mode
Camera with integrated flash unit
which does not support "CTRL "
• Mount the flash unit which is to be used as slave on the camera
• Set camera to "WL" mode
• Press the shutter release,
- the flash unit switches automatically to "SLAVE"
• Remove flash unit from camera and set up as slave. The desired mode "TTL"
(automatic in RMT or RMT2) or "M" (with partial lighting levels) can now be
set on the slave flash unit.
• Fold out the camera's own flash unit
+
+