Powering The Device On/Off; Flexible Gooseneck - LIVARNOLUX LTL 27 A1 Bedienungsanleitung

Powering the Device On/Off


Plug the power plug into a suitable power socket. No extension cables or
multiple outlet strips should be used that do not meet safety requirements.

Press the On/Off switch (1) to position "I" to power the light on.

Press the On/Off switch to position "0" to power the light off.
Notice on Mains Separation.
The device is only fully separated from the mains when the mains
plug is pulled out of the wall outlet. Switching off the device with
the incorporated switch does not disconnect the appliance from
the mains.

Flexible Gooseneck


The flexible gooseneck (3)allows you to easily adjust the direction of the
lamp to suit your needs. When doing this always make sure the lamp is on
a stable surface.

Do not turn the gooseneck more than 45º to the left or right.

Do not bend the gooseneck towards the back, but instead turn the whole
light housing round if you want the light to shine backwards.
Daylight Lamp LTL 27 A1
7 - English