Switching The Device On/Off; Orientating The Lamp - LIVARNOLUX LSL 33 A1 Bedienungsanleitung Und Serviceinformationen

Switching the Device On/Off


Plug the power plug into a suitable and easily
accessible power socket.
Extension cables or multiple outlet strips that do not
meet safety requirements may not be used.

Switch the halogen lamp on or off using the cable
On/Off switch (2).
Mains Isolation:
The device is only fully isolated from the
mains when the mains plug is pulled out of the
wall outlet. Switching off the device with the
cable On/Off switch does not disconnect the
device from the mains.

Orientating the Lamp


You can use the U-bolt to orientate the lamp shade
(3) according to your needs.

To rotate the lamp shade, first loosen the screw on
the top end of the clamp using a suitable screwdriver.

Then turn the lamp shade into the desired position
and tighten the screw again.

If you want to permanently fix the position of the lamp,
you can tighten the Phillips screws on all joints using
a suitable screwdriver.
Halogen Desktop Lamp LivarnoLux LSL 33 A1
English - 9