Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switching on and off / Selecting the operating mode
GB
IE
Adjusting the carrying handle and the stand
Maintenance
Replacing the halogen bulb
8
This appliance has four operating modes (halogen, LED operation, LED ambient
lighting and LED fl ashing light), which can be adjusted by means of the On/Off
switch
+
.
6
7
♦
Place the On/Off switch
lighting on.
♦
Place the On/Off switch
light on.
♦
Place the On/Off switch
lighting resp. LED fl ashing light off .
♦
Place the On/Off switch
on.
♦
Place the On/Off switch
♦
Place the On/Off switch
LED spotlight off .
You have the possibility to adjust the carrying handle
or into the lantern position.
♦
To do this, press the button
the handle
into the upper or lower position until it engages. The pistol
4
position is used to illuminate distant objects; the lantern position is well suited
for area searching.
In addition, you also have the option of positioning the Cordless Handheld Spot-
light in an upright position by means of the adjustable stand
can be aligned through the 5 locking positions. The eyelet on the stand can be
used to suspend the appliance.
♦
Pull the stand
into one of the fi ve locking positions and set the appliance up.
8
These LEDs are not replaceable and do not have to be serviced. Only the halogen
bulb can be replaced.
WARNING
The bulb and the refl ector become very hot during use. There is a risk of being
burnt!
►
Allow the appliance to cool down completely before changing the bulb.
at the position "I" to switch the LED ambient
6
at the position "II" to switch the LED fl ashing
6
at the position "0", to switch the LED ambient
6
at the position "I" to switch the halogen spotlight
7
at the position "II", to switch the LED spotlight on.
7
at the position "0", to switch the halogen resp.
7
on the handle
3
4
into the pistol position
4
and at the same time turn
. The light beam
8
LAH 55 A2
Werbung
Kapitel
Inhaltsverzeichnis
