Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing The Product Prior To Initial Use; Switching The Product On / Off; Switching The Colour Change Function On / Off; Replacing The Rechargeable Battery - LIVARNOLUX IAN 295689 Montage-, Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 39
Preparing the product
prior to initial use
Note: The product features a twilight sensor and
an On / Off switch
. When fully charged the
7
product on time is approx. 6 to 8 hours.
Unscrew the sphere
counter-clockwise. Set the On / Off switch
5
to the ON position before using it for the
7
first time.
Screw the sphere
into the solar module
uct in the sun.

Switching the product on / off

Slide the On / Off switch
The product will automatically switch on at
dusk. At dawn the product will automatically
switch off.
Slide the On / Off switch
tion. The product is permanently switched off.
Switching the colour change
function on / off
Make sure the On / Off switch
position.
from the solar module
4
clockwise all the way
4
and place the prod-
5
to the ON position.
7
to the OFF posi-
7
is at the ON
7
Slide the RGB switch
The product will alternate between the col-
ours RED-GREEN-BLUE with a flowing colour
transition, and repeat the cycle. The entire
process takes approx. 45 seconds.
Slide the RGB switch
position. The product will continuously light up
in the currently selected colour.
Replacing the
rechargeable battery
Note: The rechargeable battery
for prolonged operation. However, it may need to
be replaced after being used for a long time. Re-
chargeable batteries are subject to natural wear
and the output may decrease. For optimal perfor-
mance the batteries should be replaced every
12 months.
Replace the rechargeable battery as shown in
figures D–F.
Unscrew the sphere
Slide the On / Off switch
module
to the OFF position.
5
Remove the solar module
tube
or
.
2
3
Loosen the two screws
counter-clockwise using a suitable cross-tip
screwdriver and remove the housing
the remainder of the module (see Fig. D).
to the RGB position.
6
to the RGB OFF
6
is designed
12
counter-clockwise.
4
on the solar
7
from the spacer
5
on the underside
8
from
9
GB/CY
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 295691Ian 295713

Inhaltsverzeichnis