Specifications - Sharp PG-MB60X Service Anleitung

SPECIFICATIONS

Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input (INPUT 1/2)/
output (OUTPUT) signal
Horizontal resolution
Computer RGB input (INPUT 1/2)/
output (OUTPUT) signal
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Audio input signal
USB terminal
RS-232C terminal
Pixel clock
Vertical frequency
Horizontal frequency
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
Multimedia Projector
PG-MB60X
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480 /DTV480P/DTV540P/DTV576 /DTV576P/DTV720P/DTV1035 /DTV1080
Single Chip Digital Micromirror Device
Panel size: 0.7"
No. of dots: 786,432 dots (1,024 [H] x 768 [V])
1.5 x electric zoom/focus lens, F2.0–2.5, f = 21.3–31.6 mm
200 W DC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
Ω
P : 0.7 Vp-p, 75 terminated
B
Ω
P : 0.7 Vp-p, 75 terminated
R
750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
C (chrominance signal): Burst 0.286 Vp-p, 75
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 k
4-pin B-type USB female connector
9-pin mini DIN connector
12–108 MHz
43–85 Hz
15–70 kHz
2.0 W (monaural)
4.0 cm x 2.85 cm oval x 1, Voice Coil Impedance 16 ohms at 400Hz
AC 100–240 V
2.7 A
50/60 Hz
270 W (Standard mode)/220 W (Eco mode) with AC 100 V
255 W (Standard mode)/210 W (Eco mode) with AC 240 V
5 W (AC 100 V) – 6 W (AC 240 V)
1,015 BTU/hour (Standard mode)/960 BTU/hour (Eco mode) with AC 100 V
960 BTU/hour (Standard mode)/760 BTU/hour (Eco mode) with AC 240 V
41°F to 104°F (+5°C to +40°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12 7 / " x 3 33 / " x 11 7 / " (310 (W) x 89 (H) x 282 (D) mm) (main body only)
32 64 64
12 7 / " x 4 7 / " x 11 5 / " (310 (W) x 104 (H) x 287 (D) mm) (including adjustment foot
32 64 16
and projecting parts)
8.8 lbs. (4.0 kg)
Lamp unit (Lamp/cage module) (AN-MB60LP), Remote control (RRMCGA342WJSA), Power
cord for U.S., Canada, etc. (QACCDA010WJPZ), Power cord for Europe, except U.K.
(QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore (QACCBA036WJPZ),
Power cord for Australia, New Zealand and Oceania (QACCLA018WJPZ), RGB cable
(QCNWGA045WJPZ), USB cable (QCNWGA014WJPZ), Storage case (GCASNA014WJSA),
Lens cap (RCAPHA021WJSA), Projector manual and technical reference CD-ROM
(UDSKAA053WJZZ), "QUICK GUIDE" label (TLABZA793WJZZ), Operation manual (TINS-
B526WJZZ)
3
TM (DMD TM ) by Texas Instruments
Ω
terminated
Ω
terminated
Ω
(stereo)
PG-MB60X
Ω
terminated
Ω