Sharp PG-MB60X Service Anleitung Seite 21

7. Removing the ballast/power supply unit
7-1. Remove the fixing screw for the rear R/C PWB unit.
7-2. Remove 4 fixing screws, 4 WH bosses and the edge saddle for the ballast unit.
7-3. Remove 11 fixing screws and 5 WH bosses for the power supply unit.
7-4. Remove 4 fixing screws for the fan.
8. Removing the peripheral units
8-1. Remove 4 fixing screws for the front adjuster unit.
8-2. Remove 8 bracket fixing screws and remove the bracket A, bracket B and earth plate.
Power Supply PWB Unit
7-1
Rear R/C PWB Unit
7-3
7-4
Fan
7-2
Edge saddle
7-2
Bracket A
8-1
Front Adjuster Unit
Front Adjuster Unit
7-3
7-3
7-3
Power Supply Unit
7-3
7-2
7-3
7-3
Ballast Unit
8-2
Bracket B
Earth Plate
21
PG-MB60X