Sharp PG-MB60X Service Anleitung Seite 20

PG-MB60X
5. Removing the optical mechanism unit
5-1. Remove the fixing screw for the optical mechanism unit from the bottom body.
5-2. Remove 4 fixing screws for the optical mechanism unit.
5-3. Remove the duct.
6. Removing the ballast/power supply unit
6-1. Remove 2 fixing screws for the ballast/power supply unit.
6-2. Remove the fixing screw for the ballast/power supply unit (terminal side).
5-2
5-3
Duct
5-1
6-1
Ballast/
Power supply Unit
Optical Mechanism Unit
6-2
20