06/2011
1002410-03
Replacing the lamps: see page 45.
Replace the starter: see page 46.
Makrolon tubes (if fitted): see page 46.
The assembly is the same process in reverse order.
5.16
Cleaning or replacing the front panel
accent lighting
–
From the front reach under the front panel and remove the effect lamps.
Replacing the lamps: see page 45.
Replace the starter: see page 46.
Makrolon tubes (if fitted): see page 46.
The assembly is the same process in reverse order.
5.17
Cleaning or replacing ambient light
(cabin lighting)
2 effect lamps are located on the rear side of the canopy.
–
If necessary, cover the canopy in order to prevent the paint from being
scratched.
–
Remove the lamps on the rear of the canopy.
Replacing the lamps: see page 45.
Replace the starter: see page 46.
Makrolon tubes (if fitted): see page 46.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 53