After Changing The System Settings - Denon S-301 Bedienungsanleitung

System Setup
2 Checking the timer settings
1
HELP
Press the button to display the help
screen.
2
CURSOR •
Press the or ª
ENTER
"SETUP", then press the
3
CURSOR
0 or 1 button to select
Press the
"TIMER SETUP", then press the
button.
• Press the STATUS button in the standby mode to show on the
S-301's display whether the timer is turned on or off.
Example:
When the "ONCE TIMER" is on and the "EVERY TIMER" is
off
1 on/Eoff
2 Sleep timer, every timer and once timer
priority
If the times set for the sleep timer, every timer and once timer
overlap, the priority is as follows:
every timer → once timer → sleep timer
2 Changing the timer settings
Reset the timer from the start using the desired settings.
The new settings overwrite the previous settings.
2 Quitting the timer setting
(turning the operation of the timer off)
Select "DISABLE" at the "ONCE TIMER" or "EVERY TIMER"
setting screen.
2 If there is a power failure
• If there is a power failure or the power supply cord is unplugged
from the power outlet, the time display flashes when the
power comes back on. Reset the current time.
• The once timer settings are deleted. Remake the settings.
• If the everyday timer settings and the tuner presettings have
button to select
been deleted, reset them.
button.

After changing the system settings

ENTER
• This completes the procedure for changing the system
settings. Once the channel levels, distances and speaker
location have been set, there is no need to change the settings
again unless the connected AV components or speakers are
changed or the speakers are moved to different positions.
• DVD auto power off as necessary.
At the "SETUP" menu screen, press the
button.
• The new settings are entered and the on-screen display turns
off.
The setup procedure can be quit at any point by pressing
this button.
HELP
60
ENGLISH
ENGLISH
System Setup